IEPE Industrial -104 : Uniaxial Piezo Side

General  Characteristics (metric): Hex 0.8 inch, Height = 2 inch,  weight=5.0 Oz, 120°C, M8x1.25.

Special M8 Mounting

The hermetic sealed industrial piezoelectric accelerometer model 104 is design to monitor the vibration in harsh industrial environment. It uses the industry standard ®ICP 2-wire voltage transmission technique with a 4 mA minimum constant current supply. Signal ground is isolated from the mounting surface and outer case to prevent ground loops. Faraday shielding will limit sensitivity to ESD to a minimum. Annular shear mode design will prevent from thermal transient and from spurious signal from high transverse vibrations. Low noise electronic and a temperature compensated design will give you accurate result over the complete temperature range. Large choice of frequency range will help to fit almost every customer requirements. Low frequency accelerometers (A=9) incorporate a low-pass filter within the conditioning electronics. This filter attenuate the sensor mechanical resonance and the associated distortion and overload.

Typical applications: Vibrations measurement in the rugged environments of industrial machinery monitoring. High frequency version will monitor the vibration on roller bearing, pumps cavitation, .... Medium frequency version will monitor overall vibration on pumps, motors, fans, ... Low
frequency model is used in the petrochemical, machine tool, and paper industries for monitoring of slow speed agitators, cooling towers, etc.

Click here for Competitors Cross Reference List