General  Characteristics (metric): Hex 0.8 inch, Height = 0.9 inch,  weight=5.0 Oz, 120°C, 1/4" 28 UNF thread.

The hermetic sealed industrial piezovelocity transducer model 113 is design to monitor the vibration in harsh industrial environment. It uses the industry standard ©ICP 2-wire voltage transmission technique with a 4 mA standard constant current supply. Signal ground is isolated from the mounting surface and outer case to prevent ground loops. Faraday shielding will limit sensitivity to EMC to a minimum. Annular shear mode design will prevent from thermal transient and base strain. Low noise electronic and a temperature compensated design will give you accurate result over the complete temperature range.

Typical applications: Velocity is the preferred measurement for most rotating machines with rolling element bearings. Unfortunately it is sometimes impossible to get velocity (with digital or analog integration) from standard piezoelectric accelerometer : very high frequency noise can overload the accelerometer and saturate the output. Piezovelocity sensors use an internal integration circuit which inherently decrease high frequency signals allowing better measurement of low frequency signal. Paper machine dryers (when steam leaks), pumps (cavitation high frequency noise) are prone to such phenomenom.

Click here for Competitors Cross Reference List