ISO.jpg

Senses your technological NEEDS...

With 20 years of rich experience, in manufacturing and designing vibration instrumentation VibraSens is continuously serving its customers with best of its products.

Senses your technological NEEDS...

With 20 years of rich experience, in manufacturing and designing vibration instrumentation VibraSens is continuously serving its customers with best of its products.

Model 101

What makes our Model 101 the best deal in the today industry?

  • Glass seal connector has a life time warranty hermetic sealing. (Epoxy sealing is not a long term reliable solution). Integral cables are also not glass seal tight
  • Connector is fully made of AISI 316L with no plastic parts. It withstands 120°C and many chemicals
  • We use annular shear design not obsolete compression design. (Reading values are not sensitive to cable motion).
  • Our electronic uses Jfet transistor input so the sensor is shock protected. We have also incorporated ESD and miswiring protection
  • Thanks to the latest electronic design, our sensors are more compact than most competitors (Hex 22mm, height = 47mm)
  • We have developed a special M12 cordset with AISI 316L stainless steel nut and IP 68 rating

Model 109

Why Model 109 is a best deal in the market? 
After 2 years of immense efforts, VibraSens is proud to introduce his compact accelerometer model 109. It is actually the world smallest (dual case isolation with faraday shield) sensor with M12 glass seal connector. Additionally, it has many important features which makes it superior than other such sensors:

  • Annular shear design with faraday shield 
  • 80 g dynamic range (competition achieves only 50g).
  • Bias is stable +-5% over the complete temperature range -40°C to +120°C. (Competition achieves -50% at 120°C)
  • Sensor is protected against shock occurring when using a magnet. (Competition has no protection and many sensors are destroyed by an overload of the input mosfet transistor)
  • Sensor is protected against miswiring. (Competition has no protection)

Model 125

Best about Model 125, which makes it a better deal:

  • Glass seal connector has a life time warranty hermetic sealing. (Epoxy sealing is not a long term reliable solution). Integral cable is also not glass seal tight
  • Connector is fully made of AISI 316L with no plastic parts. It withstands 120°C and many chemicals
  • We use annular shear design not obsolete compression design. (Reading values are not sensitive to cable motion)
  • Our frequency range is extended for low speed machine 3 Hz to 1000 Hz. Obsolete compression design only provides 10Hz to 1000 Hz
  • Thanks to the latest electronic design, our sensors are more compact than most competitors (Hex 22mm, height = 47mm).- Each sensors shipped carries a calibration certificate with the actual readings
  • We have developed a special M12 cordset with AISI 316L stainless steel nut and IP 68 rating

Model 160

We also offer one more sensor, Model 160, that fulfills range of industrial needs because of its unique features:
Smallest sensor among our product range (dia 9mm with frequency range up to 25 kHz) with following characteristics:

  • TO-5 eq. Transistor-Style Package
  • Light weight (3 grammes, 0.1 Oz)
  • Variety of Sensitivities: 100 mV/g, 11 pC/g, etc.
  • Variety of transmission: 2-Wire ®ICP/®IEPE transmission
  • Mode / 3-Wire Voltage output / 2-wire charge output
  • Annular shear mode

© 2017 VibraSens - Your Piezoelectric Vibration sensors manufacturer | ISO 9001:2008 Certified Quality Management System