Industrial General purpose economy piezoelectric accelerometer use piezoceramic in the compression or shear mode and provide 100 mV/g ±10% ®ICP / ®IEPE Acceleration AC output. They usually sense vibration commonly found in industrial machinery : motors, fans, pumps, paper machine rolls, .... Compression piezoelectric accelerometer should not be used when high temperature gradient are present and when frequency analysis below 2 Hz are needed.
|
|
Piezoelectric Vibration Sensor Model 101.21-6 |
|
 100 mV/g ± 10% (Shear design)
Available with: MIL-C-5015, M12 or IP68 Integral cable
Available with temperature output (10mV/°C)
Hex 22 x 47 mm, 80 grammes
 English / French / Deutsch / Espanol / Portuges / Italiano / Polsku / Cesky
Cross reference list : Wilcoxon 782A / Wilcoxon 788 (7) / PCB-IMI 603C01 / Dytran 3176B / Dytran 3184E / SKF CMSS 2100 / SKF CMSS 2106 / CTC AC102-1A / CTC AC150-1A / CTC TA102-1A /
(7) Flexure design limitations are : 2Hz lowest frequency, thermal transiant sensitivity, Low resonant frequency, ....
|
|
Piezoelectric Vibration Sensor Model 103.22-6 |
|
 100 mV/g ± 10% (Shear design)
Available with MIL-C-5015, M12 connector or IP67 Integral cable
Available with temperature output (10mV/°C)
25 x 25 x 53 mm, 130 grammes, M6 or 1/4" 28 mounting
English / French / German
Cross reference list : Wilcoxon 785A / PCB-IMI 606B01 / Dytran 3202A / CTC AC104-1A / CTC TA104-1A / CTC AC108-1A /
|
|
Piezoelectric Vibration Sensor Model 105.01-6 |
|
100 mV/g ± 10% (Compression design)
Available with MIL-C-5015, M12 or IP69K Integral cable
Available with temperature output (10mV/°C)
Hex 22 x 47 mm, 80 grammes
English / French / German
Cross reference list : Wilcoxon 793 (2) / Wilcoxon 784A (7) / Wilcoxon 793T-3 / Monitran MTN/1100 (2) / Monitran MTN/1100SW (2) / Hansford HS-100 (2) / Hansford HS-120 (2) /
(2) Compression design is an old design that should not be used anymore.
Limitations are : thermal transient sensitivity, base strain sensitivity, high transverse sensitivity, 2Hz lowest frequency, Low resonant frequency, ....
(7) Flexure design |
|
Piezoelectric Vibration Sensor Model 107.01-6 |
|
100 mV/g ± 10% (Compression design)
Available with MIL-C-5015, M12 or IP68 Integral cable
Available with temperature output (10mV/°C)
25 x 25 mm x 53, 130 grammes, M6 or 1/4" Mounting
English / French / German
Cross Reference List : Wilcoxon 797 / Wilcoxon 788A / Monitran MTN/1100S (2)(3) / Hansford HS-100S (2)(3)
(2) Compression design is an old design that should not be used anymore.
Limitations are : thermal transient sensitivity, base strain sensitivity, high transverse sensitivity, 2Hz lowest frequency, Low resonant frequency, ....
(3) sensor cover not welded -> no hermeticity
|
|